With the rapid development of the express industry, the use of bubble wrap has increased rapidly, and people are paying more and more attention to the bubble wrap machine. So how to maintain the bubble film machine to extend the service life of the equipment? Next, I will briefly introduce the maintenance knowledge of the bubble film machine to help you use the correct method for maintenance.
As we all know, the composition of the bubble film machine is more complicated, so before we turn on the bubble film machine every time, we need to check the power supply, vacuum system, air pressure system and cooling system. When the equipment is started, then check whether the rotation direction of the rotating parts is correct. In addition, it is necessary to regularly check the lubrication of each lubricating part, and the electrical instruments of the bubble film machine should be properly maintained as required.
It should be noted that before operating the equipment, maintenance personnel need to read the instructions carefully to understand the control and adjustment functions, and pay attention to safety; pay attention to safety signs; wear appropriate goggles; wear appropriate protective clothing; use tools correctly; please do not Direct contact with equipment that works at high temperature or generates heat, pay attention to scalding caused by high temperature melt overflow; pay attention to scratches on precision parts; use correct methods to maintain equipment.
Designate staff to operate the equipment, do not let the extruder screw idle when there is no material, so as not to scratch the screw and barrel. When the equipment is shut down, if there is material in the barrel, before starting the machine again, the temperature of each temperature zone of the bubble film machine must be raised to the specified requirements according to the process requirements, and the machine can be started after holding for more than 30 minutes. If the temperature does not meet the requirements at this time, it is forbidden to start the bubble film machine to avoid damage to the parts.
The maintenance of the bubble film machine that needs to be paid attention to when working, the bubble film machine is used for packaging electronic components, such as: circuit boards, cards, cosmetics, small household appliances, fragile items, etc. It is usually used in various industries such as cargo transportation, food packaging, product preservation, and biotechnology. It can prevent static electricity, and can also play the role of buffering and anti-vibration.
The daily maintenance of the equipment requires not only specific maintenance, but also cleaning. For example, the mold of the equipment should be thoroughly cleaned every three months, and the grease of various bearings and the lubricating oil of the reducer should be replaced regularly. The bubble wrap machine needs to be overhauled every two years.
When putting materials into the equipment, the hopper must be kept clean and free of debris. It is strictly forbidden to enter the feeding port to prevent damage to the barrel and screw. If you notice any abnormal noise during operation, stop the operation immediately.
In addition, when the equipment is being repaired, it is not allowed to put a part of the body into the equipment to avoid sudden operation of the equipment, resulting in accidents. After the repair work is completed, the equipment must be Check the grounding to make sure the equipment is well grounded before starting the bubble wrap machine.
Many people tend not to pay attention to the maintenance work of the equipment, so the service life of the equipment is greatly reduced, and if the maintenance is not carried out in the correct way, there may even be accidents. The above is the correct maintenance method of the bubble film machine, I hope to help you maintain and maintain the equipment, thereby extending the service life of the equipment.
