The bubble film produced by the bubble bag machine uses high-pressure polyethylene as the main raw material, adds whitening agent, opening agent and other auxiliary materials, and is extruded into bubbles at a high temperature of about 230 degrees. Bubble bag machine is a new type of plastic packaging material that is light in texture, good in transparency, non-toxic and odorless, and can play the role of moisture-proof, buffering and heat preservation for products. Then, let's take a look at the operation details and correct operation method of the bubble bag machine.
When the sprayer is charging in the hopper, it should be kept clean, strictly prevent metal waste, sand, gravel and small tools from entering the material port, so as to avoid damage to the cylinder and screw, and abnormal noises are found during operation.
Therefore, when the bubble bag machine is producing and feeding, these details must be made to ensure good performance. When all of us invest in the bubble bag machine, we can invest in our bubble bag machine according to the above investment method.
Bubble bag machine operation details, let's take a look.
1. Control the detection speed and film thickness to ensure that there is no deviation in the production process and improve the quality.
2. Detect the temperature rise of each running motor and mechanical transmission, and it is necessary to ensure normal production.
3. Regularly check the working temperature, and deal with the abnormal temperature in time.
4. Observe whether the thickness of the film is uniform and whether there is any deviation in the width of the film of the inflator, and adjust it in time.
5. Check the lubrication of the gearbox and air compressor cylinder when starting.
What is the correct operation method of the bubble bag machine? When operating the bubble film machine, it is very important to master the correct operation method, so what is the correct operation method of the bubble film machine? Let's take a look together.
1. Check and control the ratio of raw materials and mix them evenly.
2. Check whether the temperature control of the composite bubble film machine is good, and whether the heating appliances are normal. Pay attention to timely adjustment, so that the heating temperature of each point is within the index range.
3. Observe and adjust the uniformity of film thickness, and the folding diameter meets the standard.
4. Check whether there are impurities in the raw materials of the composite bubble film machine, especially the iron mixed with the magnet.
5. Regularly check the temperature rise of each running motor of the composite bubble film machine and the transmission of the bubble film machine.
6. Check the pulling speed and control the film thickness.
7. Check the fuel tank pressure of the composite bubble film, it should not be too high, but there should be a spare pressure.
8. Check the lubrication of the reducer and air compressor cylinder.
Therefore, when operating the bubble film machine, these details must be done well to ensure its good performance.
The above is the operation details and correct operation method of the bubble bag machine. For more information, feel free to contact us! Our company has many years of experience and is looking forward to your joining.
